link to Home Page

Re: ZetaTalk and Spaceguard UK (D2)


PROBLEM STATEMENT
Newton for centrifugal force vs gravity for size and distance of Moon,
using real, not abstract figures.
    Article: <6jhlov$935$1@dfw-ixnews11.ix.netcom.com>
    15 May 1998 15:08:15 GMT
Copied below and at http://www.zetatalk.com/usenet/use00663.htm

ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
In article <355862F2.6534@my.signature> Joshua Hewitt writes:
>> You're saying that your equations balance, but then only
>> balance because you've CALCULATED the weight of the
>> Moon using the orbital mechanics formula, right?  So if you
>> would enter any other weight for the Moon into those
>> equations, then the Moon either plummets or ejects into
>> space?
>
> If you follow the trajectory of some small lump of rock, or
> even an artificial satelite, that orbits the moon, you have a
> situation in which m_1>>m_2, so m_1+m_2 is roughly
> equal to m_1 ("roughly" meaning 6 significant figures or
> more), where m_1 is the mass of the moon and m_2 is the
> mass of the small orbiter.  So measuring T for this orbit you
> can get a completely independant value for the moon's mass
> and, lo and behold, it's the same value as the one inferred
> from its orbit round the earth.

    So what you are saying is that you calculate the mass by placing it
    opposite your orbital mechanics equations, and then you point to the
    way these balance, the numbers on the left and right side of the equal
    sign, and crow about how accurate your math is!  Try plugging in a REAL
    estimate of the weight of the Moon.  Solid rock, with x radius, and
    what number do you come up with?  You have a monster Moon up there,
    drifting slowly around its gravitation attraction.  Intuitively, it
    seems it should be dropping to Earth and not losing any time doing so.
    If you use REAL numbers for its mass, your orbital mechanics go out the
    window, do they not?
        ZetaTalk™